The dress names on the PDFs
Each PDF now carries the dress's name as it appears on this site. Before, the titles were the draft names of the pattern files:
- Pink bow keyhole mini: Bow Cap-Sleeve Mini Dress
- Red gingham button-front mini: Gingham Button-Front Mini Dress
- Navy gingham off-centre button mini: Gingham Button-Front Cap-Sleeve Mini Dress
- both wrap minis: Draped Mini Dress
The corner mark in the A4 note
The assembly note on page 1 of each A4 pattern spoke of black corner squares that complete into whole squares. The sheets carry a cross inside a 9 mm circle at each shared corner, and the note and the sewing guide now name that mark: lay each sheet over its neighbour so the crosses sit exactly on top of each other and the edge ticks meet. How to print and tape the sheets.
The red gingham mini's sheet map
Its 20 A4 sheets are now laid out 2 across and 10 down (before: 5 across, 4 down). Page 2 of the file shows the map.
The sewing guides
Each guide has a new section, Derived, not seen, that says how the back, which no photo shows, was drawn. The line on the hem now says its position was read from the photograph, not measured.
The cutting layouts
Both wrap minis now ask for a zip at least 600 mm long (before: 650 mm). A few tape and interfacing lengths moved by 1 to 7 mm, for example the red gingham mini's neck tape from 438 to 445 mm.